With the HoleMole Core Hole Filling System, you can plug and fill a core hole from above without ever having to go below, climb a ladder, affix a board, operate a lift or use a power tool. And, you can fill a hole from start to finish in less than a minute.
Mole expandable hole plugs – the key to the HoleMole system are these clever expandable hole plugs. Called Moles, they are made of 16-gauge galvanized steel and available in 5 sizes and they feature one-way collapsible flaps around the perimeter. You attach a threaded aluminum rod to the center of the Mole and when you lower the Mole down through a core hole the flaps collapse until the Mole emerges through the bottom of the hole. Pull the Mole back up against the bottom of the hole and the flaps stop in position, plugging the hole and preparing it for filling.
Expansion flaps are removable so you can modify the Mole to work around plumbing, HVAC supports and the like. Larger Mole sizes (#4 and #5) feature stability ribs for added strength
Bendable tabs on sizes #2—#5 provide proper resting position and even faster installation for wall applications
Larger Mole sizes (4 and 5) feature stability ribs for added strength
Once your Mole is in position, you hold it in place by connecting the threaded rod to the heavy-duty Mole Stand, a stout, three-legged steel apparatus that you position directly above the core hole.
A revolutionary and patented oversized nut that attaches to the opposite end of the threaded rod from the Mole and connects the rod to the Mole Stand to hold the Mole in ready position. The SpeedNut is unique in that you do not have to turn it. You simply depress a button plunger which disengages it from the threads so you can slide it into position. Then, simply re-engage and turn to final tighten. Using a SpeedNut is a big-time saver.
Once you have the Mole in place the core hole is prepared for filling. Speed Chute is a formed 10-gauge aluminum device into which you pour your hole-filling product. Speed Chute securely slides into slots on the Mole Stand at a slight angle and guides product to the center of the hole as you pour making filling the hole fast, clean and easy.
Wall Applicator is made to fill core holes through vertical surfaces. The Mole is inserted horizontally through the hole, then the connecting rod goes through the Wall Applicator, which is then fastened to the wall. The Mole and rod are held in place with the SpeedNut and the hole filled through the chute at the top.
WITH THE TRADITIONAL WAY OF FILLING CORE HOLES
The traditional method for filling core holes calls for one to go to the floor below to install a plywood board to the underside of the hole as a plug to prepare for filling. This can take a fair amount of time and involve climbing ladders, using power lifts and using power tools, all possible safety issues, as well as disrupting whatever might be happening on that floor.